IMPORTANT!

 

There have been a few incidents this year with helmets flying off during impact.    Please pass this excerpt from the Snell standard to all the members of your clubs:  

 

The Snell Foundation recommends the simple, straightforward procedure recommended to consumers by most helmet manufacturers:

           

Position the helmet on your head so that it sits low on your forehead; if you can't see the edge of the brim at the extreme upper range of your vision, the helmet is probably out of place.  Adjust the retention system so that when in use, it will hold the helmet firmly in place.  This positioning and adjusting should be repeated to obtain the very best result possible.  The procedure initially may be time consuming.  Take the time.

           

Try to remove the helmet without undoing the retention system closures.  If the helmet comes off or shifts over your eyes, readjust and try again.  If no adjustment seems to work, this helmet is not for you; try another.

           

This procedure is also the basis of the test for helmet stability described in this Standard.  This test performs the same steps but uses standard headforms.  However, you must still perform this procedure for yourself when buying a helmet and every time you wear a helmet.  Only in this way will you be able to make all the proper adjustments to get the best fit possible.  Furthermore, your test on your own head will be an improvement on ours; you will determine whether the helmet is appropriate for you personally.

 

 

Regards,

 

Curtis Pepe